SEALLESS CENTRFUGAL PERISTALTIC ACCESSORIES & ASSISTANCE

Model H25 Hydra-Cell™Pumps

The H25 Hydra-Cell™ Pump is a powerful positive displacement pump capable of flow rates from 2 to 20 GPM at pressures from 50 to 1,000 PSI.  These are very versatile pumps, used at their maximum flow range for high pressure water and machine tool coolant applications and at slower speeds for abrasive slurries, viscous fluids and precise injection applications.

H25 Pumps are available with both metallic and non-metallic pump ends.  As with all Hydra-Cell™ Pumps, the H25 can tolerate a closed inlet while running, pump fluids in excess of 200F, and run dry.

It would be truly difficult to list all the applications that use this model pump.  Chip board manufacturing plants such as Georgia Pacific use H25's for metering wax and resin in the manufacture of those products.  We have supplied flanged versions to refineries, non-metallic versions for acid (membrane) filtration and most Tru-Green Chemlawn fertilizer trucks utilize 1 or 2 H25 Hydra-Cell™ Pumps.  If you have a difficult to pump fluid or are currently using a pump such as a progressing cavity style that costs a lot to maintain each year, than this is a pump you should consider.  We provide pump ends only or complete pump/motor skids with belt or direct drive and VFD if desired.

Non-Metallic Pump EndFlanged H25Belt Driven H25 Pump System
 
Photos Specifications Dimensions Materials of Construction Part Numbering Guide
 
FACTORY DIRECT PIPELINE PRODUCTS, INC.
Your Single Source for Industrial Filtration and Valve Products

Copyright 2001-2011		 phone: 908.362.9981  
Accept Credit Cards Online
fax: 908.362.5631
email: fdpp@fdpp.com