FDPP on Google+FDPP on LinkedinFDPP on Twitter

Factory Direct Pipeline Products, Inc.
InnovativePumps.com
PHONE:
908.362.9981
FAX: 908.362.5631



Wanner Engineering Model T100 (Low Pressure) Hydra-Cell™ Pumps

Flow rates from 30 to 96 GPM at pressures ranging from 1500 to 2100 PSI

Model T8045 Hydra-Cell PumpThere are three models of the T100 (Low Pressure) series of Hydra-Cell™ pumps that are capable of varying flow rates; 96.0 GPM at 1500 PSI, 76.5 GPM at 1850 PSI, and 68.0 GPM at 2100 PSI. 

This model T100 is one of the highest flow rate Hydra-Cell™ pumps available and is available with either a Nickel Aluminum Bronze or 316L Stainless Steel pump head having 17-4 Stainless Steel, Hastelloy C, or Tungsten Carbide check valve assemblies and FKM or Buna-N elastomers.

T-Series cutawwy illustrationThis massive 1,100 lbs. (500kg) pump has a 3" pump shaft and can withstand inlet pressures up to 500 PSI. 

The T100 (Low Pressure) has the same sealless design as other Hydra-Cell™ pump, eliminating clean-up costs related to leaking seals or packing and protecting operators and the environment from dangerous fluids such as those containing hydrogen sulfide.

Unique Features of T100 (Low Pressure) Hydra-Cell Pumps

  • Available to meet API 674

  • Seal-less design eliminates leaks, hazards and the expense associated with seals and packing

  • Low NPSH requirements allow for operation with a vacuum condition on the suction - positive
    suction pressure is not necessary

  • Can operate with a closed or blocked suction line and run dry indefinitely without damage, eliminating
    downtime and repair costs

  • Unique diaphragm design handles more abrasives with less wear than gear, screw or plunger pumps

  • Hydraulically balanced diaphragms to handle high pressures with low stress

  • Lower energy costs than centrifugal pumps

  • Rugged construction for long life with minimal maintenance

  • Compact design and double-ended shaft provide a variety of installation options

Additional Information