FDPP on Google+FDPP on LinkedinFDPP on Twitter

Factory Direct Pipeline Products, Inc.
InnovativePumps.com
PHONE:
908.362.9981
FAX: 908.362.5631


Stancor PST ANSI Centrifugal Pumps

Manufactured from solid Kynar or PTFE

 

STANCOR PST ANSI CENTRIFUGAL PUMPThe ANSI Centrifugal Pump that sets the industry standard for corrosive and abrasive process fluid applications.  Stancor ANSI Centrifugal Pumps provide exclusive design advantages over all other centrifugal pumps. For applications requiring durability and performance on dirty, difficult fluids, Stancor pumps are by far the most cost-effective solution.

Stancor ANSI Centrifugal Pumps conform to ANSI B73.1 specification for dimensions, shaft deflections and bearing life. If you've ever wanted an alternative to costly high-alloy pumps, wicking associated with fiberglass pumps, or the complications of lined pumps, Stancor ANSI pumps are what you've been looking for.

 

Stancor Centrifugal Pump solid component construction means:
  • No liners separating or collapsing
  • No permeation
  • Impellers that can be trimmed to your application

In addition to solid liquid end components, Stancor ANSI Centrifugal Pumps also has the following features to enhance mechanical seal life:

  • Concentric casing which reduces hydraulic imbalances in the ANSI pump casing
  • Duplex angular contact bearings which eliminate any axial motion of the impeller, and shaft 
TYPICAL APPLICATIONS
  • Acetone
  • Aluminum Fluoride
  • Bromic Acid
  • Calcium Hypochlorite
  • Chlorine, wet
  • Chromic Acid
  • Copper Chloride
  • Ferric Chloride
  • Hydrochloric Acid
  • Hydrofluoric Acid
  • Magnesium chloride
  • Mercuric Acid
  • Nitric Acid
  • Phosphoric Acid
  • Sodium Fluoride
  • Sodium Hydroxide
  • Sodium Hypochlorite
  • Sulfuric Acid

 

 

 

 

 

Designed by the process industry for the process industry:

  • Cost-effective, rugged and durable design

  • Smooth, full-curve performance

  • Stancor pumps are available in sizes 1-1/2 x 1 x 6 to 3 x 4 x 12

  • These sizes will provide flows to 700 gpm and heads to 350 feet

  • Temperatures to 325° F.

  Working Pressure: 200 PSIG
TTTemperature: -20F to 325F
CCapacities: 2-700 GPM
HHeads: up to 350 Feet