4010 size industrial peristaltic pumps are designed to output up to 58 GPM at pressures over 200 PSI for occasional applications. Its' lubricated rotary shoe design enables the Vector model 4010 peristaltic pump to be used for continuous duty applications for flow rates up to 50 GPM and pressures of approximately 80 PSI. The performance chart outlines its performance capabilities for continuous, intermittent and occasional duty applications.
The four hose materials for the model 4010 are natural rubber, oil-rate nitrile, EPDM and Hypalon. If you are unsure of which hose material is best for your application, our compatibility charts might be helpful. We can also provide samples for 48 hour soak tests if desired. The connections are 150 # RF ANSI flanged in 316SS, polypropylene or PVDF materials.
We offer (1) 7½ HP and (4) 10 HP gear motor sizes to support flow rates from 20 to 58 GPM and these motors can be used with an inverter for a 4:1 turndown ratio if desired.
A 2" hose which is only wearable part
The 4010 peristaltic pumps are designed to handle:
Solids to 1/3" (fiber length up to ¼")
Viscosity up to 100,000 cps
Liquid temperatures up to 180ºF
Maximum Discharge Pressure: 218 PSI
Maximum Suction Lift: 29.5 feet
Maximum Suction Pressure: 21.8 PSI
Maximum HP 10
The approximate cost is $13,500 depending upon the gear motor size and hose material